Rockspace WiFi Extender Setup

Rockspace WiFi Extender Setup

The Rockspace WiFi extender setup allows you to configure your new wireless range extender. Basically, the setup involves configuring your Rockspace range extender with your existing router’s network. So make sure you have a working wireless router at your premises with which you will set up your new extender.

Moreover, it is pretty easy to set up your Rockspace range extender. You just have to address certain requirements and then proceed to set up your device. So this post will take you through the requirements and steps to set up your wireless range extender without any hassle.

Requirements for Rockspace WiFi extender setup

Here are certain requirements in order to proceed with the setup and configuration part. Kindly make sure you meet all the requirements for a hassle-free setup experience.

  1. You should have a new Rockspace WiFi extender
  2. The extender should not be pre-configured or set up already
  3. It is important that you know your WiFi network’s credentials
  4. A working computer or laptop with an up-to-date web browser

Steps for Rockspace WiFi extender setup

This part of the page will walk you through the steps to set up your Rockspace WiFi range extender. We will proceed with the web interface method to configure the wireless range extender. Kindly follow the steps very carefully.

  1. Firstly, connect your Rockspace Wifi extender to the power outlet nearby your existing router.
  2. Turn On your computer or laptop and connect it to your extender’s network.
  3. You can either use a network cable or WiFi.
  4. Open a web browser on your system and enter the default IP address in the address bar.
  5. Type 192.168.0.254 in the address bar. You can also use the default web address re.rockspace.local.
  6. Press Enter. Now, you will be taken to the Rockspace extender login page.
  7. Enter the default credentials of your extender and you will navigate to the Rockspace WiFi extender setup.
  8. Let your device search for nearby networks. Connect it to your router’s network.
  9. Enter your router’s WiFi password and click Connect.
  10. After that, follow the on-screen instructions to finalize the settings of your device.

Finally, the Rockspace extender will be set up successfully. After that, you can place your device anywhere you want.

Reference By : Rock Spacehttps://www.youtube.com/watch?v=7X5IPkDFt2Q

How to set up Rockspace WiFi extender using WPS method?

It is very simple to set up your extender via the WPS method. Follow the steps below;

  1. Firstly, make sure the Rockspace WiFi extender is powered On.
  2. Your router should also be powered On.
  3. After that, press the WPS button on your Rockspace WiFi extender.
  4. Within 2 minutes, press the WPS button on your router.
  5. Wait for a few seconds and the Rockspace WiFi extender setup will be completed via the WPS method.

Read More Topics :

Altice Wifi Extender Setup

How to Fix Red Light Issue on Comfast Extender?

Final thoughts

This post was all about the Rockspace WiFi extender setup and configuration. We hope that this post helped you set up and install your new WiFi range extender without any hassle. In case you have any doubts or come across any issues, kindly feel free to reach out to our support team for more help.