The ap.setup is a web address that lets you configure or manage your wireless range extender. You can use this web address with the help of a web browser. The address goes into the address bar from where it navigates you to the extender login page.

If you have a Comfast or Wavlink or Brostrend extender, you can definitely use this web address to access your device. You don’t need to be connected to the internet service in order to access the ap.setup page. The web interface is directly served by your wireless range extender through this address.

Benifits of ap.setup

There are several benefits of using the default web address as your extender’s login address. Here are some of the most common benefits of ap. setup.

  • The web address helps you login to your wireless range extender
  • Users can easily configure the range extender settings
  • Manage the wireless settings of your range extender
  • You can reboot or reset your extender via ap.setup web address
  • The URL also helps you update your extender’s firmware
Ap.setup |
How does ap.setup work

How does ap.setup work?

The web address works by connecting you to a secure web interface of your range extender. When you enter this URL in the address bar, the web browser takes you to the login page. Thereafter, you just need to enter the login credentials and you are logged into the device using this URL.

If you are wondering you to set up and install your extender through this address, we have explained that in the next section.

How to install extender via AP.Setup?

In case you have recently bought a new wireless range extender, you can set it up with the help of the default web address ap.setup. In this section, we have put down some important points to walk you through the setup instructions.

  • Firstly, connect your wireless range extender to the power outlet.
  • Secondly, connect the extender to your PC or laptop.
  • You can either use a wired or wireless method.
  • Open up a web browser and type http://ap.setup in the address bar.
  • Press Ente rand the web browser will navigate you to the ap.setup login page.
  • Enter the default username and password of your wireless range extender.
  • Once you login to the wireless range extender, you need to go to the ap.setup wizard.
  • Follow the on-screen instructions to set up your wireless range extender to the router’s network.
  • Make sure you set up the same password for your extender as that of your router’s network.
  • After that, click Apply.
  • Let your extender reboot. The extender will be successfully set up via the ap.setup web interface.
How to install extender via AP.Setup

How to access ap.setup login page?

How to access ap.setup login page

It is pretty easy to access the ap.setup login page on any WiFi-enabled device. Follow the steps below;

  1. Firstly, you must connect your range extender to the PC or laptop.
  2. After that, open a web browser on your device connected to the extender’s network.
  3. Type http ap.setup in the address bar and click Go.
  4. Thereafter, the login page will appear on the screen.
  5. You need to put down the username and password of your extender.
  6. Press Enter. You will be logged into the device.
  7. It is pretty easy to access the login page and get inside your device.

Comfast extender setup via ap.setup

The Comfast extender can be set up through the same web address. Follow the simple steps to set up your device;

  1. Login to the Comfast extender via ap.setup.
  2. Make sure it is already powered On.
  3. Use the default login credentials of your device to login.
  4. After that, establish a connection between your extender and the router.
  5. Follow the on-screen instructions to finalize the settings.
  6. Finally, the Comfast extender will be set up successfully.
Comfast extender setup via ap.setup

How to do Brostrend extender setup through ap.setup

There’s a no different method to set up your Brostrend extender through the ap.setup web address. You can follow the setup instructions already mentioned in this post.

Altice extender setup via ap.setup


Advance setting of ap.setup.com

To configure the advance settings of ap.setup.com on your wireless range extender, you need to login to the device. Here are the steps that you need to follow.

Advance setting of ap.setup.com
  1. To configure the advance settings of ap.setup on your range extender, connect your device to the PC.
  2. Open a web browser and type https://ap.setup or
  3. Once you login to the device, go to the Advanced page.
  4. Now, you can easily configure the advanced settings of your range extender.
  5. Make sure you click the Apply button in order to save the new settings on your device.

Frequently asked questions

Why ap.setup not working ?

If you see the default web address ap.setup not working, make sure your PC or smartphone is connected to the range extender’s wireless network. Also make sure the range extender is powered On and not experiencing any power outage. If the issue persists, you can connect your range extender to some other device and re-attempt to login to the range extender.

How to update the firmware using ap.setup?

To update the firmware using ap.setup web address, you need to login to wireless range extender. Go to the web browser and type http://ap.setup in the address bar. Enter the username and password to login to the device. Select Advanced or Maintenance and navigate to the Firmware Upgrade page. Follow the on-screen instruction to update our extender’s firmware. 


Why can’t I connect to ap.setup ?

Are you experiencing difficulties connecting to ap.setup? No worries! You just have to make sure you enter the address in the address bar of the web browser. If you enter the address in the search bar, you won’t connect to ap.setup. If the issue persists, make sure you reboot your extender and then reconnect to it.

How to reset the extender via ap.setup or


How to setup ap.setup with WPS?

To setup your wireless range extneder using the WPS method, you need to follow the steps below:

  1. Firstly, make sure your wireless router also supports the WPS method to configure your range extender.
  2. Press the WPS button on your range extender.
  3. Within 2 minutes, go to your wireless router and press the WPS button on it.
  4. Wait for a few seconds. Your extender will be set up with the router using the WPS method.