Comfast Extender WiFi Setup

Comfast extender wifi setup lets you configure your device with your main router’s network. With Comfast extender setup, you can easily connect to your main  network and experience and inuniterrupted yet extended network across your home or office.  

With a bundle of features, this devices make a perfect extender for your home networking needs. Comfast extender can be set up in a multiple ways. You can set up your extender using the web interface, WPS button, and Access Point mode. 

This page will walk you through the instructions to perform Comfast extender setup using all the aforementioned methods. 


Requirements for Comfast extender WiFi setup

There are certain requirements that you need to make sure are met in order to perform the Comfast extender setup. Kindly ensure the points mentioned below are in place before proceeding to set up your range extender. 

  • Firstly, make sure the Comfast wireless range extender is plugged into the power outlet. 
  • The range extender should already be powered on. 
  • Both range extender and your router need to be in close proximity to each other. 
  • Connect your Comfast range extender to the PC or mobile. You can either connect through an ethernet cable or a wireless method. 
  • However, we recommend you use an ethernet cable to ensure a secure connection.

Comfast extender WiFi setup via web interface

  • To set up a Comfast extender using a web interface, you need to either use your PC or a mobile.
  • Now, open a web browser and enter the default comfast login IP
  • The default IP will further redirect you to the Comfast login page. 
  • After that, provide your Comfast login credentials and click Login.
  • Now, start with the Comfast extender quick setup wizard. 
  • Scan for your home WiFi  network and attempt to connect to it. If prompted, enter the Wifi password. 
  • Now, configure the dual-band settings of your device. 
  • Finalize the settings of your range extender and click Apply.
  • Finally, your device will reboot after saving the new settings. 

Now that you have successfully set up the Comfast extender, kindly unplug it from the power outlet. Now, take it to the place where your main router’s network would struggle. Plug the router into the power outlet and place it there.

Comfast extender setup via WPS button

  1. Firstly, locate the WPS button on your router before you start with the Comfast extender setup using the WPS method. 
  2. If the WPS button is supported by your router, proceed with further steps. 
  3. Now, go to your Comfast extender, press the WPS button. 
  4. After that, go to your router and press the WPS button within 2 minutes. 
  5. Wait for a few minutes. Both devices will attempt to establish a connection through the WPS method.

You can now install your extender wherever you want. However, makes sure you do not install it too far from the main router as it would struggle catching the networks from the router. 

Comfast extender setup via WPS button

extender setup via AP mode

  1. Setting up the Comfast extender via Access Point settings is easy. 
  2. Login to Comfast extender using the default Comfast login IP
  3. Now, enter the username and password. After that, click Login. 
  4. You will see the Comfast extender dashboard. 
  5. Choose the AP mode to set up the router settings. 
  6. Firstly, select the encryption type of your network. 
  7. Now, assign an network name or SSID and network key to your wifi network.
  8. At last, click Apply and the device will be configured successfully.

How to connect Comfast extender to your computer?

  1. To connect your PC to the Comfast extender’s wifi network, follow these steps. 
  2. Look for the WiFi icon on the bottom-right side of your PC’s monitor.
  3. Now, click the Wifi icon and choose your Comfast network from the list of active networks. 
  4. Enter the Wifi password that you assigned during the Comfast extender setup. 
  5. Finally, you will be able to connect Comfast extender to your computer.

Troubleshooting Tips for comfast extender

If you have ever experienced connection issues at your place then you must check the reason behind it. The dead spots can restrict you in the middle of the work and keep you hanging. This happens because generally, our router doesn’t cover the entire home network as they provide wifi signal only up to the limited area. Along with us, the router’s signal gets disturbed due to obstruction and interference present nearby the routers. The losing wifi connectivity can cost us our time, patience and efforts.  Therefore, in order to fix the interference, you can install a Comfast wifi extender at your place. You don’t face any more issues that is why we are here to help you with Comfast extender setup. not only this, we will also provide you details on Comfast router setup.

What are the benefits of Comfast extender setup?

Comfast wifi extender handles all of your wireless connectivity issues. They work great to eliminate all dead spots and it spread the wireless signal to all across your place even if you have a big home. The Comfast wifi extender takes the signal from your wireless router and circulates it to the area with low or no signal range. However, you might find it difficult to perform Comfast setup by yourself. That is why we are here to provide you with Comfast extender setup steps. 

How to install the Comfast CF-WR302S?

A Comfast CF-WR320S extender is a device which boosts or extends the wireless signal to the larger area. It removes all the dead zones and  transfers the signal to the area where it is difficult to receive wifi signal. You will immediately feel the improvement and experience fast wifi signal all across your place. So, we believe that Comfast extender setup can become an excellent weapon to eliminate all kind of wireless connectivity issues at your home or office wifi network. 

How do I perform Comfast Xfinity setup?

Before we can answer your question, how do I perform Comfast Xfinity setup or how to perform Comfast extender login, it is important for you to know that you can use Comfast repeater in three different modes.


As a range extender:

Comfast wifi extender provides high-speed, reliable, and long-range network connection which extends the range and diminishes all dead zones that exist in your home or office network after you access Comfast login page.


An access point:

You can set up Comfast extender as an access point if you want to expand the wireless connectivity to other areas in your home or office. Just take your Comfast device and place it in Access point mode.


As a router:

If you wish to use Comfast as a router then simply connect an Ethernet cable from your modem to the extender. You can call us to know more about Comfast setup guide.

Important steps for setup Comfast wifi setup


There are some Comfast wifi repeater instructions which you need to perform prior to Comfast setup. Here are few tips on Comfast setup which can help you with ideal placement of your repeater.  Before you can access the Comfast Xfinity home page, you need to place your extender in an ideal location which will help in the better performance and wide wifi coverage all over your home. The ideal location to place your extender is somewhere midway between your router and devices that you want to connect it to. 

Learn how to access Comfast login page

To begin with the Comfast extender setup, first of all, you need to plug your extender in a wall outlet. Just make sure that area you are choosing to plug in your extender, it must be midway between your existing router and the area with the low wifi signal. Now, you need to log into your extender by using your computer or any device.

Comfast extender login

Follow the steps given below for Comfast Xfinity log in:

  • To begin with, the Comfast extender login, launch a web browser on a wireless device or computer.
  • In the address bar field of the web browser enter the Comfast sign in default IP address i.e.
  • Now, a login window will appear on the screen asking for default login credentials for Comfast wireless repeater setup.
  • To access the Comfast login page, enter ‘admin’ both username and password field and press ‘Enter’ key.
  • In order to complete the Comfast wifi repeater setup, make the changes with the settings that you wish to make.
  • By following these Comfast wifi repeater instructions, your Comfast setup is completed.

How to setup Comfast as an access point/router?


To set up your Comfast extender as an access point or router, you need to follow the steps which are given below:

  • To begin with, the Comfast router setup, connect an Ethernet cable from Comfast device to the modem.
  • Connect your computer to the Comfast device using Wi-Fi.
  • Now, open an internet browser and enter to begin with the Comfast extender login process.
  • Enter the login details for Comfast router setup.
  • Once you are logged in to the Comfast router setup page, you can make the desired changes with the settings of your router.

How to restart comfast repeater?

In case, you are facing issues while performing Comfast extender setup steps or if you can’t recall the username and password for Comfast Xfinity log in then you can restart or reset your repeater. After resetting your repeater , you will be able to get it back to its factory default settings.

To reset the Comfast Xfinity repeater, press the ‘Reset’ button for a few seconds. When the LED on the repeater changes color, you can release the button.

One thing that you should keep in mind while resetting your repeater is that all the settings that you have made with the repeater will get back to the default and you won’t be able to undo this action.


Troubleshoot issues with Comfast setup guide

If you are unable to enjoy the internet after successfully setting up your Comfast extender then make sure the password you have entered is correct. Also, if it doesn’t resolve the issue you can try restarting your Xfinity repeater.

You need to enter the following credentials for the Comfast extender login:

Username: admin

Password: admin

If the wireless devices are unable to get the IP address from the extender, then follow these steps:

  • Move your Comfast extender closer to your existing router and move your wireless devices closer to your Comfast extender.
  • Disable and enable the wireless interface and check if the wireless device can get the IP address now or not.
  • If your router has enabled Mac filter then disable it.

You can try changing the wireless channel of your main router. You can even try a new password and username.

Comfast extenders are universal extenders and they are compatible with the majority of the wireless routers.

We hope that these tips on Comfast setup will help you to configure the extender at your place. If you still need help for Comfast extender setup then you get in touch with us. We have an especially dedicated team who are experts in topics related to Comfast extender and router.  Therefore, you can call us on our toll-free number or do a live chat with us to take Comfast setup guide. Here are a few topics which might need our help:

  • How to install the Comfast CF-WR302S
  • How do I perform Comfast setup?
  • How to restart Xfinity repeater?
  • Comfast sign in
  • Important steps for setup Comfast wifi repeater
  • Access Comfast Xfinity home page
  • How to perform Comfast router setup
  • Steps for Comfast router login

Frequently Asked Questions (FAQs)

How do you fix a wifi extender which constantly restarts?

In case your Comfast extender constantly restarts, you should first reboot the device. If the issue persists, make sure the extender is getting an adequate power supply. Try changing the power outlet of your extender. If you still can’t resolve the issue, please proceeds with the firmware update. 

Can a WiFi repeater have a same SSID?

Yes, a WiFi repeater can have the same SSID as that of a wireless router. In fact, it needs to have the same SSID in order to repeat the network properly. 

What is the best way to setup a whole home wifi?

The best way to setup a whole home wifi is placing your modem and router close to each other. Furthermore, if you have a range extender, make sure it is placed in a place where your router’s network can’t reach. There should not be any electronics devices or home appliances nearby your WiFi system as these appliances can muck up with your wifi network. 

Why is my wifi range extender slow?

In case you experience low internet speeds through your range extender, make sure to give your router, modem, and repeater a powercycle. Please ensure that all the devices are not surrounded by thick walls, fish tanks, or home appliances. 

So that was all about the Comfast extender Wifi setup and answers to some frequently asked questions. We hope you liked this post and it really helped you learn all the steps to set up a Comfast extender with different methods. If you encounter any issues or problems with your device, kindly get in touch with our support team. Our team of professional networking technicians will help you fix your issue instantly.